Cabling Equipment

Single Eye Cable Pulling Sock's Ref: 105-1 Sometimes called Cable Socks or Cable Grips.An efficient method of supporting or pulling cables.Manufact...

Duct Rod  (Conduit Rod) Ref:102-1-1 & 102-1-4 Ref:102.1.1 & 102.1.4 High quality glass fibre reinforced helically wound epoxy rod giving go...

6mm blue polypropylene rope approximate length of 500m and 220m, approximate breaking strain of 550kg.   ** 220m supplied as coil ** 500m Supplied...

Duct Rod (Conduit Rod) 60m Ref: 102-2-1 100m Ref: 102-2-3 150m Ref: 102-2-5 High quality glass fibre reinforced helically wound epoxy rod giving g...

Heavy Duty Cable Roller Ref: 103-2-1 We offer from our standard range a heavy duty assembly suitable for cables up to 125mm dia. Steel frame large ...

Double Eye Cable Pulling Sock's Ref: 105-2 Sometimes called Cable Socks or Cable Grips.An efficient method of supporting or pulling cables.Manufact...

Duct Rod (Conduit Rod) Ref: 102-3-3, 102-3-5, 102-3-6  High quality glass fibre reinforced helically wound epoxy rod giving good adhesion propertie...

11mm  Duct Rod on Reel / Cobra Duct Rod (Conduit Rod) Ref: 102-4-1, 102-4-2, 102-4-3 & 102-4-4 High quality glass fibre reinforced helically wo...

Manhole Cable Roller Ref: 103-6-1 We offer from our standard range using two vertical and one horizontal steel rollers for taking the heaviest cabl...

Duct Brushes Ref: 120-1 Cylindrical Brush with Polypropylene Centres drilled and fitted with threaded steel Rod, Steel end caps and pulling eye eac...

Triple Corner Cable Roller Ref: 103-4-1 We offer from our standard range using two vertical and one horizontal steel rollers for taking the heavies...

3.0t (3000 Kg) Cable Drum Jacks Cable jacks are used to lift, support and distribute low and high voltage cable drums to enable efficient cable la...

Triple Manhole Cable Roller Ref: 103-7-1 We offer from our standard range using two vertical and one horizontal steel rollers for taking the heavie...

CDJ Bridge Roller Ref: 103-1-1 This is our standard Bridge Roller being able to place same over a cable up to 90mm dia already laid in the trench. ...

Polypropylene Mandrels Ref: 120-3 Used to prove there are no restrictions within the duct.Approximately 240mm long fitted with a threaded rod and p...

3T Hydraulic Jacks Lightweight hydraulic drum jacks which are almost indispensable for use in the cable yard. Versatile and easily adjustable withi...

Duct Rod  - Swivel Pulling Eye Swivel Pulling Eye - Used for attaching draw wire to the end of the rod or used as a leader. These are supplied as s...

Duct Rod (Conduit Rod) Ref: 102-5-2 & 102-5-6 Ref: 102.5.2 & 102.5.6 High quality glass fibre reinforced helically wound epoxy rod giving g...

Heavy Duty Suspension Roller Ref: 103-14-1 To take initial strain on the heaviest cable where they are lifted from the floor and onto cable trunkin...

Angle Corner Cable Roller Ref: 103-8 Purpose designed for taking the heaviest cables round difficult corners and bends. Incorporates a vertical and...

Duct Rod  - Roller Guide The Roller Guide is used to push through conduit with cable already in place. The rollers prevent the rod from wedging in ...

6.0t (6000 Kg) Cable Drum Jacks Cable jacks are used to lift, support and distribute low and high voltage cable drums to enable efficient cable la...

Duct Rod  - Pulling Eyes Pulling Eyes  - Used for attaching draw wire to the end of the rod or used as a leader. These are supplied as standard wit...

Steel Bellmouths c/w 4 Guide Roller Ref: 117-3 In separable hinged halves to guide the cable through the duct to avoid damage to both the Cable or ...

Cable Drum Rotators - Max Payload: 200kgs Small well built Cable Drum Rotators, with carry handle, 200kg working load for small cable drums. Spec R...

8.0t (8000 Kg) Cable Drum Jacks Cable jacks are used to lift, support and distribute low and high voltage cable drums to enable efficient cable lay...

6T Hydraulic Jacks Lightweight hydraulic drum jacks which are almost indispensable for use in the cable yard. Versatile and easily adjustable withi...

Ref: 122-1-5 Glass reinforced polyester rods set for gaining access to wire & cables under floorboards in ceiling ducts trunking & wall ca...

Steel Mandrels Ref: 120-2 For Duct proving. Painted Steel 240mm long fitted with threaded steel rod and pulling eye each end to give overall length...

Duct Rod  - Spare Wheel Ref: 102-12-3 Spare Wheel - Used or range of 9 / 11 / 14 mm duct rods These are supplied as standard with each rod. ...

Duct Rod  - 6MM STAINLESS HEXAGON DEE SHACKLE (FOR DUCT RODS) Dee or U shackle for use with duct rod guided tips when a larger pulling eye is requi...

Duct Rod  - (Male) replacement tip Replacement Tips for our range of duct rods with screw end. ****Replacement tip are to be use with engineering a...

Duct Rod  - Flexible Guide Heads Flexible Guides are used for leading the rod around tight bends in Duct. For use with: 9mm   Duct R...

Duct Rod  - Splice Connectors Used to repair a break in the rod. ****Splice Connector tip are to be use with engineering adhesive EPD 160 3ml and ...

EPD 14mm Duct Rod on Reel / Cobra   A high quality glass fibre reinforced epoxy rod with a helically wound surface and a polyethylene outer coating...

Haacon Cable Reel Jack 8.0t Per Jack. (16.0t PAIR) Note –Sold without spindle bar. Supplied as set (2 x 8T jacks) 8.0t each Haacon Cable Reel Jack...

10T Lightweight Hydraulic Drum Jacks Lightweight hydraulic drum jacks which are almost indispensable for use in the cable yard. Versatile and easil...

Duct Rod  - Spare Rod Handle Spare Rod Handle - Used or range of 9 / 11 / 14 mm duct rods These are supplied as standard with each rod. ...

Duct Rod  - Spare Rod Guide Spare Rod Guide - Used or range of 9 / 11 / 14 mm duct rods These are supplied as standard with each rod. F...

Suspension Roller 103-13-1 To enable cables to be winched and suspended in high buildings prior to being positioned on gantries, beams etc.Zinc pla...

Draw Off Roller Ref: 103-12-1 To lead the cable directly from the drum into the trench. 75mm diameter steel tube roller on low friction sintered bu...

Skid Plate Trench Roller Ref: 103-11 Can be used with the Skid Roller as an alternative to the Corner Roller System. Note, you need to buy 2 x Skid...

Vertical Cable Roller Ref: 103-10 Vertical Cable Roller 103-10-2 Nine vertical steel rollers each running in roller bearings and mounted in a heavy...

Horizontal Cable Roller 103-10-1 Two horizontal rollers with quick release gate opening to allow easy entry and removal of cables up to 125mm diame...

V Cable Roller Ref: 103-5-1 A guide roller for use in front of the drum which centralises the cable from the drum into the trench. Sealed roller be...