Locking Grab Hook with 3 Chain Links – Portable Winch UK

A small simple and practical hook. The lock avoids the chain sliding out of the hook when there is no tension in the rope.

The 7,9 mm (5/16") opening of the grab hook will accept either 6 mm (1/4") or 7.9 mm (5/16") chain.

Three 8 mm chain links are installed at the end to easily connect to a rope with a 13 mm diameter or less or to a karabiner.

Attach it to the rope using a bowline knot which can easily be untied after use and which will maintain up to 70% of the rope’s capacity.

Additional Information

• The NEWTON is the International System unit for force; it is equal to the amount of net force required to accelerate a mass of one kilogram at a rate of one meter per second squared.

The WORKING LOAD LIMIT (WLL) is the maximum load which should not be exceeded under any condition.

The MINIMUM BREAKING STRENGTH (MBS) is observed during a destructive test. You should divide it by an appropriate safety factor